Modeling of Dispersive Materials Using Dispersion Models for FDTD Application

A nonlinear optimization algorithm based on the Nelder Mead method is used to characterize the frequency dependent permittivity of 15 materials based on Lorentz, modified Lorentz, Drude and Lorentz-Drude models. The optimized model parameters are used to calculate the complex relative permittivity of each material and compare it with experimental data. In each case, a very good match is found between the optimized and experimental data over a long wavelength range. Comparative study of the models used for each material is performed based on accuracy, wavelength range of applicability and computational efficiency. The parameters presented can be used for computer simulation of electromagnetic wave phenomena involving these materials.     

Mixed convective heat transfer enhancement in a ventilated cavity by flow modulation via rotating plate

The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining external fluid flow through an opening at the bottom of the left cavity wall while leaving it through another opening at the right cavity wall. A counter-clockwise rotating plate at the center of the cavity acts as an active flow modulator. Moving mesh approach is used for the rotation of the plate and the numerical solution is achieved using arbitrary Lagrangian-Eulerian finite element formulation with a quadrilateral discretization scheme. Transient parametric simulations have been performed for various frequency of the rotating plate for a fixed Reynolds number (Re) of 100 based on maximum inlet flow velocity while the Richardson number (Ri) is maintained at unity. Heat transfer performance has been evaluated in terms of spatially averaged Nusselt number and time-averaged Nusselt number along the heated wall. Power spectrum analysis in the frequency domain obtained from the fast Fourier transform analysis indicates that thermal frequency and plate frequency start to deviate from each other at higher values of velocity ratio (>4).     

A comparative study of SiAlON ceramics

Two different varieties of Si₃N₄ powders were used to prepare SiAlON ceramics. 100% β-Si₃N₄ was used from refractory grade powders (B1) and another purer 98% α-Si₃N₄ (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m^1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.     

Formal probabilistic analysis of a surgical robot control algorithm with different virtual fixtures

Surgical robots are increasingly being used in operation theaters involving normal or laparoscopic surgeries. The working of these surgical robots is highly dependent on their control algorithms, which require very rigorous analysis to ensure their correct functionality due to the safety-critical nature of surgeries. Traditionally, safety of control algorithms is ensured by simulations, but they provide incomplete and approximate analysis results due to their inherent sampling-based nature. We propose to use probabilistic model checking, which is a formal verification method, for quantitative analysis, to verify the control algorithms of surgical robots in this paper. As an illustrative example, the paper provides a formal analysis of a virtual fixture control algorithm, implemented in a neuro-surgical robot, using the PRISM model checker. In particular, we provide a formal discrete-time Markov chain-based model of the given control algorithm and its environment. This formal model is then analyzed for multiple virtual fixtures, like cubic, hexagonal and irregular shapes. This verification allowed us to discover new insights about the considered algorithm that allow us to design safer control algorithms.     

Toxicity and Metabolism of Layered Double Hydroxide Intercalated with Levodopa in a Parkinson’s Disease Model

Layered hydroxide nanoparticles are generally biocompatible, and less toxic than most inorganic nanoparticles, making them an acceptable alternative drug delivery system. Due to growing concern over animal welfare and the expense of in vivo experiments both the public and the government are interested to find alternatives to animal testing. The toxicity potential of zinc aluminum layered hydroxide (ZAL) nanocomposite containing anti-Parkinsonian agent may be determined using a PC 12 cell model. ZAL nanocomposite demonstrated a decreased cytotoxic effect when compared to levodopa on PC12 cells with more than 80% cell viability at 100 μg/mL compared to less than 20% cell viability in a direct levodopa exposure. Neither levodopa-loaded nanocomposite nor the un-intercalated nanocomposite disturbed the cytoskeletal structure of the neurogenic cells at their IC₅₀ concentration. Levodopa metabolite (HVA) released from the nanocomposite demonstrated the slow sustained and controlled release character of layered hydroxide nanoparticles unlike the burst uptake and release system shown with pure levodopa treatment.     

Bio-cellular processes modeling on silicon substrate: receptor–ligand binding and Michaelis Menten reaction

Reducing transmit power is the most straightforward way towards more energy-efficient communications, but it results in lower SNRs at the receiver which can add a performance and/or complexity cost. At low SNRs, synchronization and channel estimation errors erode much of the gains achieved through powerful turbo and LDPC codes. Further expanding the turbo concept through an iterative receiver—which brings synchronization and equalization modules inside the loop—can help, but this solution is prohibitively complex and it is not clear what can and what cannot be a part of the iterative structure. This paper fills two important gaps in this field: (1) as compared to previous research which either focuses on a subset of the problem assuming perfect remaining parameters or is computationally too complex, we propose a proper partitioning of algorithm blocks in the iterative receiver for manageable delay and complexity, and (2) to the best of our knowledge, this is the first physical demonstration of an iterative receiver based on experimental radio hardware. We have found that for such a receiver to work, (1) iterative timing synchronization is impractical, iterative carrier synchronization can be avoided by using our proposed approach, while iterative channel estimation is essential, and (2) the SNR gains claimed in previous publications are validated in indoor channels. Finally, we propose a heuristic algorithm for simplifying the carrier phase synchronization in an iterative receiver such that computations of the log likelihood ratios of the parity bits can be avoided to strike a tradeoff between complexity and performance.     

Non-uniform illumination in concentrating solar cells

After a gap of more than two decades, Concentrator Photovoltaics (CPV) technology is once again under spotlight for making use of the best available solar cell technologies and improving the overall performance. CPV finds its use in a number of applications ranging from building integration to huge power generation units. Although the principles of solar concentration are well understood, many practical design, operation, control issues require further understanding and research. A particular issue for CPV technology is the non-uniformity of the incident flux which tends to cause hot spots, current mismatch and reduce the overall efficiency of the system. Understanding of this effect requires further research, and shall help to employ the most successful means of using solar concentrators. This study reviews the causes and effects of the non-uniformity in the CPV systems. It highlights the importance of this issue in solar cell design and reviews the methods for the solar cell characterization under non-uniform flux conditions. Finally, it puts forward a few methods of improving the CPV performance by reducing the non-uniformity effect on the concentrator solar cells.